The MicroChem® water analysis system can be used as an analyzer, controller or both so you only need a single instrument regardless of individual needs. With the MicroChem® transmitter/controller, set up is as simple as a USB connection and data management options allow for a clearer, more comprehensive understanding of plant operations.
Configure your MicroChem® system as an analyzer/transmitter or controller, measure up to three of the following parameters: pH, ORP, chlorine, chlorine dioxide, conductivity, and 4-20 mA. The MicroChem® water analysis system is available packaged as a complete residual analyzer or as individual components, allowing flexible configurations to meet specific customer needs. The MicroChem® controller provides control of the measured parameter using a standard PID algorithm in conjunction with the sensor input signal, or as a PID compound loop controller utilizing the signal from the sensor and an optional 4-20 mA process flow signal. Two outputs are available from each channel card. One control output is available both as a 4-20 mA control signal or a pulse width modulation output. A second software configurable 4-20 mA output signal is available on each configured channel.